How do I set up DStv on my TV? Check it out | how to connect dstv decoder to tv

How to install the new DStv Now app for your smart TV
Connect your smart TV to the internet using ethernet cable or Wi-Fi.Go to the App Store on your TV, search for “DStv Now”, and install the app.Once installed, the app will display a code on your TV screen.On a laptop/desktop, go to and sign in.

How do I setup my DStv decoder?

Steps To Run The DStv Installation Wizard
Switch on your decoder.Wait for the booting to complete.After that, press the “DStv” button on your remote.Select “Settings” using the right arrow key.Scroll down and choose “Satellite Settings“.Select “Home Network“.After that, select “Launch Installation Wizard“.

How do I connect my DStv to my flat screen TV?

Connecting your new model tv to a decoder is simple as all you need is an HDMI cable. At the back of your decoder, there is a port marked HDMI, and it is also available on the back of your TV. You can use an HDMI cable to make this connection and enjoy your programs on your TV.

How can I connect my decoder to my TV without HDMI?

How do you connect a TV to a receiver without HDMI? You can use any RCA audio cables, a composite video cable, a 5-cable component RCA video cable, or an HDMI converter that matches the input option you have available.

Why is my DStv decoder not working?

If your dstv decoder is refusing to start properly after loadshedding and is showing the orange light and probably blinking red and green, here is what you can do. Press and hold the power button on the decoder for about 30 seconds. The lights will blink and the device will load and start properly.

What is a smart LNB?

where customers make use of their own satellite dish). From a technical viewpoint, the DStv Smart LNB combines the features of a DStv Switch into a single UniCable LNB and offers a single cable solution for distribution of multiple satellite signals.

How do I get signal on my DStv decoder?

How To Fix Signal Strength On DStv?
Check F-type connectors. Check for incorrectly connected F-type connectors on the LNB and at the back of the decoder.Correct the LNB alignment. Adjust satellite dish alignment. Replace a faulty LNB.Move your satellite dish. Cut down or prune trees that may obstruct the signal.

How do I scan my DStv signal?

How to Check and Detect the Problem Causing Poor Signal Quality. Once you encounter a poor signal error, you can press the HELP button on your remote and click on General Information. Then, click on Select Tuner Status Signal Quality & Strength. Here you will be able to view the strength of the signal.

What is a LNB cable?

A low-noise block downconverter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the radio waves from the dish and converts them to a signal which is sent through a cable to the receiver inside the building.

How do I activate DStv decoder for the first time?

How To Activate & Create Account For Your New DStv Decoder
Make sure you have checked your DStv smart card or IUC number.Write down the decoder serial number.Now, switch on your DStv decoder.Scan your DStv decoder to get all the channels.After scanning your DStv Digibox, you will see channel 100 working.

How do I install DStv cable?

Connect the cable from the satellite dish directly to the LNB input on the back of the decoder. Connect the cable from the satellite dish directly to the LNB input on the back of the decoder. Connect either cable from the satellite dish directly to the LNB input on the back of the decoder.